Using Bluetooth ® Devices; Using The Bluetooth Mobile Phone - JVC KW-HDR720 Manual De Instrucciones

Using Bluetooth ® devices
For Bluetooth operations, it is required to connect the Bluetooth adapter, KS-BTA100 (not supplied)
to the auxiliary input jack (R-AUX/BT ADAPTER) on the rear of the unit. (page 12)
• For details, refer also to the instructions supplied with the Bluetooth adapter and the Bluetooth
device.
• Operations may be different according to the connected device.
Preparation
1
Register (pair) a Bluetooth device with KS-BTA100.
Refer to the instructions manual supplied with KS-BTA100.
2
Change the <SRC SELECT> settings of this unit.
[Hold]

Using the Bluetooth mobile phone

(Low)
KS-BTA100
Microphone
Using the Bluetooth audio device
1
(CD receiver)
If playback does not start, operate the Bluetooth audio player to start playback.
[Press] Selects track.
[Hold] Fast-forwards or reverses the track.
About microphone volume:
When you turn off the power of the CD receiver, the volume level changes to Normal.
22 ENGLISH
Adjusting the microphone volume
Volume level: High / Normal (initial) / Low
(High)
[Hold]
] "BT AUDIO"
] <SRC SELECT> ] <R-AUX> ]
<BT ADAPTER>
• Receiving a call
When a call comes in...
• Making a call
Making a call to the last connected number from
your phone.
• Switching between handsfree and phone
While talking...
• Ends/rejects call
• Voice dialing
Voice dialing is available only when the connected
mobile phone has the voice recognition system.
2