Product Overview; Intended Use; Main Parts Of The Lift - Invacare ISA COMPACT Manual Del Usuario

Invacare® ISA™

3 Product Overview

3.1 Intended use

The stand assist patient lift is a battery-powered transfer
device and is intended to transfer and position an individual
from one seating surface to another. For example:
• Between the bed and a wheelchair
• To and from the toilet
• Rehabilitation, assisting a patient from a seated position
to a standing position
The maximum safe working load is stated in 11 Technical
Data, page 27
The stand assist patient lift is designed to be used indoors on
a level surface, in hospitals, nursing facilities and domestic
areas. The stand assist patient lift can be turned (rotated) in
place for transfers with limited floor space.
A healthcare professional or private person who has received
proper training is the intended operator of this product.
Indications
The stand assist lift is intended to transfer and position
partially immobile weight-bearing patients.
Contraindications
The stand assist lift is contraindicated for patients who:
• are not cooperative
• are not able to understand and follow instructions
• do not have head and neck control
• do not have reasonable trunk stability
Some slings designed for the stand assist lift are
contraindicated for patients who cannot support the majority
of their weight. Refer to the sling user manual for more
information.
8

3.2 Main parts of the lift

Boom
A
Hook for sling
B
Hand grip
C
Lifting arm
D
Push bar
E
Lifting actuator
F
Mast
G
H Leg support (fixed or swiveling)
Base with foot pedal for manual leg spreader
I
Foot plate (high, low or inclined)
J
Front castors
K
Leg
L
Base with actuators for electrical leg spreader —
M
with or without actuator covers
Rear castors with brake
N
O Hand control
Emergency stop
P
CBJ Home control unit with integrated battery
Q
1654371-A