Skil SD561801 Manual Del Propietário página 21

d) When charging is complete, the charging indicator light will
remain green, without flashing. Remove the USB charging cable
from the tool.
NOTICE:
The bottom of the tool may become warm during charging.
This is normal.
NOTICE:
Do not charge the tool in extremely hot or cold conditions.
Charging is best achieved at normal room temperature.
Fig. 2
(Optional)
Direction-of-Rotation (Forward/Center-Lock/Reverse)
Selector
WARNING
to help prevent accidental starts and accidental discharge .
Your tool is equipped with a direction-of-rotation selector, locat-
ed above the trigger switch. This selector is designed to change
the direction of rotation of the bit and to lock the trigger in the
"OFF" (center-lock) position. There is also a Forward/Reverse
Indicator on the top of the tool to indicate the current direc-
tion-of-rotation selection for your convenience.
After tool use, lock the direction-of-rotation
selector in the "OFF" position (center-lock)
21