Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Selecting
Choose the element/burner that is best fit to the
cookware size. Each element/burner on your new
Cooktop
cooktop has its own power levels ranging from low
Settings
to high. Power level settings necessary for cooking
will vary depending on the cookware being used,
the type and quantity of food, and the desired
outcome. In general use lower settings for melting,
holding and simmering and use higher settings for
heating quickly, searing and frying. When keeping
foods warm confirm selected setting is sufficient
to maintain food temperature above 140°F. Larger
elements and elements marked "Keep Warm" are
not recommended for melting.
Hi is the highest power level, designed for
large quantity rapid cooking and boiling. Hi will
operate for a maximum of 10 minutes. Hi may
be repeated after the initial 10 minute cycle by
pressing the + pad.
How To
To Turn On
Hold the Sync Burners pad for about half a
Synchronize
second to connect the two burners. Operate
Left Elements
either element as described on page 7 to adjust
power level.
Using Your Cooktop
Induction Cooktop
CAUTION: Do not place any cookware, utensils or
leave excess water spills on control key pads. This
may result in unresponsive touch pads and turning
off the cooktop if present for several seconds.
Hi
boiling quickly
frying
searing
reducing
simmering
holding
Low
melting
To Turn Off
1. Touch the On/Off pad on either burner to turn
off the Sync Burners.
or
2. Touch the Sync Burners to turn both burners off.
11
Publicidad
Capítulos
Tabla de contenido
