Installing / Removing The Base Stand - Proline L1950HD LED Manual De Instrucciones

Getting Started

Installing / Removing the Base Stand

Base Stand Assembly Instruction
1.
surface.Use a cloth to protect. Locate the bottom
at the stand.
2. Fix the bracket with stand to the bottom of the
TV with the four screws.
INSTALLATION NOTES
This TV can be connected to an AC 100-240
Volts,50/60 Hz power supply. Never connect
straight to a DC power supply.
Locate the TV in a room where light does not
strike the screen directly. Total darkness or a
Soft and indirect lighting is recommended for
comfortable viewing.
Allow enough space between the TV and the
wall to permit ventilation.
Avoid excessively warm locations to prevent
possible damage to the cabinet or premature
component failure.
6
WALL MOUNTING INSTALLATION
GUIDELINES
1. Place the LED LCD Television onto a solid
surface. Please place some soft material over
the front of the screen to protect it from any
damage.
2. Remove the four screws to the TV .
3. Remove the stand column.
4.
onto a wall mounting bracket (not included) via
the four VESA standard holes on the back of the
television.
75 x 75mm VESA mount