Displaying Individual Stored Values - boso medistar+ Manual Del Usuario

Displaying individual stored values

62
➡ In order to bring back the last mea-
surement stored, press the M but-
ton once more. The number of the
measurements appears in the dis-
play (see illustration 8). After two
seconds the corresponding measu-
rement value (systole, diastole and
pulse) appears automatically (see
illustration 9).
M
Illustration 8 Illustration 9
M SYS.
Systole
mmHg
DIA. mmHg
Diastole
mmHg
mmHg
Pulse/min.
PUL/min
➡ By repeated pressing of the M but-
ton, all stored measurements will be
brought up in succession and appe-
ar in the display as described above.
If no button is pressed, the unit switches
off automatically after 5 seconds.
➡ To start a new measurement, simply
press „START".
➡ How to erase memory:
Push M button during memory dis-
play for approx. 5 seconds until
„M" starts blinking in the display.