Publicidad
Idiomas disponibles
Idiomas disponibles
Precautions
About data compatibility
• Do not use disks created by packet write software not supplied with the unit for "Dock&Done" of the unit.
The data may be damaged or lost.
• To format a blank disk for "Dock&Done," use "Dock&Done" of the unit, or use the supplied B's CLiP6
software with a PC to format the disk in UDF1.5 format. Do not use disks in formats other than UDF1.5 for
"Dock&Done" of the unit. The data may be damaged or lost.
When cleaning the unit, do not use thinner, benzine, or any other solvent
If the unit comes into contact with chemicals such as insecticide or is wiped with thinner or benzine, the finish
may deteriorate or peel.
To clean the unit exterior, wipe with a soft cloth. If stains are persistent, dampen the soft cloth with water or a
diluted mild detergent, wring it carefully, and then wipe the exterior with the cloth.
Do not allow the unit to maintain contact with rubber or plastic products for
a long period of time
Deterioration and discoloration may occur if the unit maintains contact with rubber or plastic products for a
long period of time.
When transporting the unit
When transporting the unit, place it in the original box with the original packing material.
If the original packing material is not available, pack the unit with enough cushion to absorb any impacts during
transportation.
Laser safety information
This product conforms with the class 1 laser products international standards IEC 60825-1, CENELEC EN
60825-1, and JIS standards (JISC6802). Although class 1 laser products are not considered harmful to the
human body, read the following precautions and use this product safely.
Precautionary items
1 ) Use of controls or adjustments or performance of procedures other than those specified may result
in hazardous radiation exposure.
2 ) Do not open the interior of this product. There are no internal parts which may be adjusted or
replaced by the user. Looking directly at the internal laser light source may cause eye-sight damage.
EN-16
Publicidad
