Publicidad
Idiomas disponibles
Idiomas disponibles
Playing back the images (Storage function)
If you turn on the power again while the digital camera remains docked on the cradle, the digital camera enters
playback mode. You can display the disk contents on the digital camera's LCD monitor by selecting
"STORAGE" from the menu.
For details on the operating the storage function, refer to the advanced manual supplied with the digital camera.
The available operations of the storage function vary depending on the disk. For details, refer to "Types of disks
for data storage and use with this unit" (g page 20).
Notes
• Occasionally, image playback or display time may be delayed if there is a significant increase in files added to the disk.
• If you perform "STORAGE" for a large movie/sound file, the movie or sound may be played intermittently or not smoothly
depending on the digital camera.
• Erasing an image using the storage function is only possible on these disks, DVD-RW/DVD+RW/CD-RW. The unit is only
compatible with "ERASE," so even if you select "ALL ERASE," only the first image will be erased.
If you execute "All ERASE," the next image may take a long time to display, which may cause malfunction.
• In Dock&Done mode, you cannot rotate, protect, or delete the image files on CD-R/ DVD-R/ DVD+R disks.
• If you select "ALL" in the slideshow, the oldest image may be delayed when switching from the newest. We recommend to
playing back images by selecting "SELECT ALL FROM DATE."
• When closing the storage function, select "EXIT" from the menu on the digital camera. If you disconnect the digital camera
from the cradle without exiting from the menu of the camera, the data in the disk may be corrupted (the ACCESS indicator
blinks red).
• To play back images from another disk, first close the storage function on the menu of the digital camera. Then, after
disconnecting the digital camera from the cradle, change the disk and operate the storage function again.
Duplicating all the images in the digital camera onto a disk
(Share disk creation)
For details on usable disks and features, refer to "Types of disks to store data and use with this unit" (g
page 20).
1
Turn the power switch on.
Check that the power indicator (green) and the
2
From the top menu in the digital camera's playback mode, select "MODE MENU"
and then "CREATE SHARE DISK".
For details on digital camera's menu operations, refer to the advanced manual with the digital camera.
3
Insert a blank disk into the unit.
Q
DOCK-side indicator (green) are illuminated.
I
O
mode
EN-27
Publicidad
