cecotec Mambo 9090 Manual De Instrucciones página 52

ENGLISH
To crush or chop hard or large quantities of food, select speed 5 at first and then switch it to 10
to ensure perfect performance.
Temperature
Press this button to enter temperature-setting mode. The temperature icon will flash on the
display.
Turn the knob left to decrease the temperature and right to increase it, from 37 ºC to 120 ºC. The
selected temperature value will blink until the robot reaches the set temperature.
The temperature indicator will turn on red when the jar reaches very high temperatures, as a
warning to avoid burns.
If the temperature icon is red and you want to operate the machine at a high speed, reduce the
food quantity to below 1.5L.
Heating power
Press this button to enter heat-power setting mode. The heat power icon will flash on the
display.
Turn the knob left to decrease heat power and right to increase it, from level 1 to 10.
Low heat power is suggested to cook fatty foods to avoid it from burning and small quantities
of food, as both require precise temperature and control.
High heating power will cook food much faster.
The heat power function will not activate unless the temperature is set too. It is suggested to
use the default setting for each temperature level.
Kitchen scale
Mambo 9090 includes a built-in kitchen scale. It weights up to 4,999 grams, in a 1-gram
interval.
The robot must be paused to to use the scale tool. Tap the scale icon, the display will show "0
00 0" by default, indicating the scale has been activated. Ingredients are weighed as they are
introduces in the jar, and the display shows the exact value.
If there are ingredients inside the jar already and new ones are introduced, the scale will add
both values and the display will show the total weigh. If food is removed from the jar, the scale
will take away that weight from the total and will display the final value. The display might
show negative values when food is removed from the inside of the jar.
Tare function
To restore the weight displayed and tare the scale with food inside the jar, tap the scale icon.
The display will show "0 00 0" again and the robot will be ready to weight new foods.
To quit the scale menu and return to pause mode, tap any of the robot icons. The
display will show the parameters previously set.
52