ENGLISH
E3
The motor is
blocked
E4
The temperature
is too high
E5
The motor's
temperature is
too high
E6
The change in
speed could
not be done
successfully
E7 & E8
E12
Scale measure-
ment error
38
There is too much food
Remove some food
inside
from inside
the jar.
the jar or cut the food
to smaller
pieces and restart the
machine.
There is no or very
Add food in the jar.
little food in
the jar and the set
temperature is
too high for too much
time.
The machine has been
Stop operating the
operating
machine and
with too much
allow it to cool down
quantity of food
before
for too much time.
restarting it again.
Speed change
Remove the jar, turn
between low level
the fixing
(1-5) and high level
bracket manually and
(6-10) was
fix the jar
blocked.
and restart.
Please, contact the
Technical
Support Service of
Cecotec at
+96 321 07 28.
The maximum measu-
Remove weight
rement value has been
from the scale until
exceeded.
it reaches a value
below 4.999 g.
8. TECHNICAL SPECIFICATIONS
Model: Mambo 8090
Product reference: 04131
1700 W (Motor 700 W Heating power 1000 W)
200-240 V~ 50/60 Hz
Made in China | Designed in Spain
9. DISPOSAL OF OLD ELECTRICAL APPLIANCES
The European directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE), specifies that old household electrical appliances must
not be disposed of with the normal unsorted municipal waste. Old appliances
must be collected separately, in order to optimize the recovery and recycling
of the materials they contain and reduce the impact on human health and
the environment.
The crossed out "wheeled bin" symbol on the product reminds you of your
obligation to dispose of the appliance correctly. If the product has a built-in battery or uses
batteries, they should be removed from the appliance and disposed of appropriately.
Consumers must contact their local authorities or retailer for information concerning the
correct disposal of old appliances and/or their batteries.
10. TECHNICAL SUPPORT SERVICE AND WARRANTY
This product is under warranty for 2 years from the date of purchase, as long as the proof
of purchase is submitted, the product is in perfect physical condition, and it has been given
proper use, as explained in this instruction manual.
The warranty will not cover the following situations:
• The product has been used for purposes other than those intended for it, misused, beaten,
exposed to moisture, immersed in liquid or corrosive substances, as well as any other fault
attributable to the customer.
• The product has been disassembled, modified, or repaired by persons, not authorised by the
official Technical Support Service of Cecotec.
• Faults deriving from the normal wear and tear of its parts, due to use.
The warranty service covers every manufacturing defects of your appliance for 2 years, based
on current legislation, except consumable parts. In the event of misuse, the warranty will not
apply.
If at any moment you detect any problem with your product or have any doubt, do not hesitate
to contact Cecotec Technical Support Service at +34 963 210 728.
ENGLISH
39