Interruption Of Sterilization Cycle - Tecno-gaz Europa B xp Instrucciones De Uso

FIGURE 7
Frontal view 1.1
Pos. 3
8.10 – INTERRUPTION OF STERILIZATION CYCLE
A sterilization cycle can be voluntarily interrupted by pressing the button
The autoclave will emit a beep, go into decompression and on the display will appear the message error 001
(INTERRUPTED CYCLE).
To reset error, maintain pressed simultaneously the buttons below indicated, until the intervention of
an acoustic signal:
55
FIGURE 8
Frontal view 1.2
Pos. 4
for at least 2 seconds.
DXBA408 Rev_14