Comeg SYMBIOZ Cam+ Manual Del Usuario página 17

6
Operating guidelines
Below is the comprehensive list of the configurable functions:
Short press
No action
Brightness +
Brightness -
Light source - Intensity +
Light source - Intensity -
Peripheral 1
Peripheral 2
Mirror
Freeze frame
Recording images on the camera
(if equipped with an integrated recorder)
Record / Stop video recording on the camera
(if equipped with an integrated recorder)
(a) Recording images on the PC
(b) Record / Stop video recording on the PC
By default, the following configuration is applied (factory setting):
B1 (short press / long press): Brightness - / Light source.
B2 (short press / long press): Brightness - / Insufflator.
B3 (short press / long press): No action / AWB.
Mirror mode: an "M" is displayed on the monitor to indicate that the mirror mode (inverted image)
is active, and disappears when it is deactivated.
Freeze mode: an "F" is displayed on the monitor to indicate that the freeze mode is active, and
disappears with it is deactivated.
Type of press
No action
Brightness +
Brightness -
Light source - Intensity +
Light source - Intensity -
Peripheral 1
Peripheral 2
Mirror
Freeze frame
AWB
Insufflator (RUN / High Flow Rate / STOP)
Light source (ON / OFF)
Recording images on the camera
(if equipped with an integrated recorder)
Record / Stop video recording on the camera
(if equipped with an integrated recorder)
(a) Recording images on the PC
(b) Record / Stop video recording on the PC
Long press
17