Before First Use - Tribest dynablend clean Manual De Uso

BEFORE FIRST USE

1. Clean all parts thoroughly and dry.
2. Take out the required length of cord from the Electric Cord Tidy at the base of the
Dynablend
NOTE:
The Red Dial Light will flash if the Dial is at the 'OFF' position.
3. Turn on the machine by turning the Dial to the 'ON' position. The Red Dial Light will
become solid and the Blue Pre-Programmed Button Lights will be blinking. Now, your
machine is ready to use.
NOTE:
1) For safety reasons, if the electricity goes out while the Dynablend Clean is in
operation with the Dial positioned at a variable speed, the Red Dial Light will
flash without resuming operation. This prevents the motor from automatically
engaging when the electricity comes back on. If this occurs, turn the Dial to the
'ON' position and make sure the Red Dial Light becomes solid and the Blue
Pre-Programmed Button Lights blink, and then resume operation.
2) If the electricity goes out while the machine was in operation with the
Pre-Programmed Buttons, the Red Dial Light will be solid and the Blue
Pre-Programmed Button Lights will blink when the electricity comes back on.
You may then resume operation.
12
,
Clean and plug it into an outlet.