Discs - Teac CD-RW890MKII Manual Del Usuario

Ocultar thumbs Ver también para CD-RW890MKII:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Playable discs
Please use CD discs bearing the "COMPACT disc DIGITAL
AUDIO" logo.
CD-R and CD-RW discs properly recorded and finalized in
audio CD format.
The main unit can play the above discs without an adapter . Other
discs are not available .
If you attempt to play discs other than the above, a loud
noise may occur to damage the speakers or your hearing.
Do not play such discs.
< Copy-protected discs, DualDiscs and other discs which do not
conform to the CD standard may not play back correctly in this
player . If you use such discs in this unit, TEAC Corporation and
its subsidiaries cannot be responsible for any consequences or
guarantee the quality of reproduction . If you experience problems
with such non-standard discs, you should contact the producers of
the disc .
About CD-R and CD-RW discs
The main unit can play CD-R and CD-RW discs recorded in audio CD
format (CD-DA) .
< Remember to finalize a disc recorded with the CD recorder .
< Depending on the quality of the disc and/or the condition of the
recording, some CD-R/CD-RW discs may not be playable .
< If you are in any doubt as to the care and handling of a CD-R/
CD-RW disc, read the precautions supplied with the disc, or
contact the disc manufacturer directly .
Recordable discs
CD-R and CD-RW discs bearing the "DIGITAL AUDIO" logo
6

Discs

Cautions for use
< Do not use cracked discs as doing so may cause a malfunction .
< Printable CD-R and CD-RW discs are not recommended, as the
label side might be sticky and damage the unit .
< Do not stick papers or protective sheets on the discs and do not
use any protective coating spray .
< Use a soft oil-based felt-tipped pen to write the information on the
label side . Never use a ball-point or hard-tipped pen, as this may
cause damage to the recorded side .
< Never use a stabilizer . Using commercially available CD stabilizers
with this unit will damage the mechanism and cause them to
malfunction .
< Do not use CDs with an irregular shape (octagonal, heart shaped,
business card size, etc . ) . CDs of this sort can damage the unit:
Handling disc
< Always place the disc on the disc tray with the label side
uppermost . (Compact discs can be played or recorded only on
one side . )
< Scratches, fingerprints, dirt, etc . on the signal recording surface
(without labels) may cause a playback error . Be careful when
handling .
< To remove a disc from its storage case, press down on the center
of the case and lift the disc out, holding it carefully by the edges .
How to remove the disc
Storing disc
< Discs should be returned to their cases after use to avoid dust and
scratches that could cause the laser pickup to "skip" .
< Do not expose discs to direct sunlight or high humidity and
temperature for extended periods . Long exposure to high
temperatures will warp the disc .
< CD-R and CD-RW discs are more sensitive to the effects of heat
and ultraviolet rays than ordinary CDs . It is important that they are
not stored in a location where direct sunlight will fall on them, and
away from sources of heat such as radiators or heat-generating
electrical devices .
< Dirt on the disc may cause the sound to skip or lower the sound
quality . Always keep it clean when storing .
Maintenance
< Should the disc become dirty, wipe the surface radially (from the
center hole outward towards the outer edge) with a soft, dry cloth .
< Never use such chemicals as record sprays, antistatic sprays or
fluid, benzine or thinner to clean the discs . Such chemicals will do
irreparable damage to the disc's plastic surface .
How to hold the disc

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido