Programming Example - Dal Zotto EDY Manual Del Usuario

PROGRAMMING EXAMPLE

Let's suppose that the weekly programmer function is to be used and the 2 time slots are to be used in the following way:
- 1st time slot: from 08:00 to 12:00 every day of the week, with room temperature at 19°C, excluding Saturday and Sunday
- 2nd time slot: from 15:00 to 22:00 only on Saturday and Sunday, with room temperature at 21°C
CONTROLS PROCEDURE:
Press key 5 and SET CLOCK will appear.
Press key 2 until ENABLE CHRONO appears
- Enable the chrono
- Enable slot 1 and 2.
- Press key 1 to exit
* Where "ENABLE CHRONO" is not present
in the menu, enabling is done directly in
SET CHRONO.
Press key 2 and SET CHRONO will appear.
Press key 5 to con rm and continue
programming.
The scrolling text
START PRG1 OFF will appear.
1ST TIME SLOT SWITCH ON
Using keys 2 - 3, enter the time "08:00",
which corresponds to the switch-on time of
the 1st time span. The START PRG1 text will
appear followed by the time set.
To con rm and continue programming,
press button 5. Press button 4 to go back to
the previous parameter.
2ND TIME SLOT SWITCH ON
At this point, the second time slot must be programmed.
The sequence to be followed is the same and is repeated as per the 1ST TIME SLOT SWITCH ON.
On this occasion simply enter the time, for example start at 15:00 and Stop at 22:00 and to activate the days Saturday and Sunday by setting
them at "ON".
WHEN THE WEEKLY PROGRAMMER IS ACTIVE, A BOX OF THE RELATIVE ICON WILL APPEAR ON THE
CONTROL BOARD.
48
1ST TIME SLOT SWITCH OFF
SET
Using keys 2 - 3, enter the time "12:00",
CLOCK
which corresponds to the switch-o time
of the 1st time period. The STOP PRG1 text
will appear followed by the time set.
To con rm and continue programming,
press button 5. Press button 4 to go back to
ENABLE
the previous parameter.
CHRONO
ENABLING THE 1ST TIME SLOT DAYS
To do this, use keys 3 and 5 in the following
way:
SET
Key 5 - allows to scroll the various days,
CHRONO the scrolling text with the day of the week,
followed by OFF.
Use key 3 to enable-disable (ON/OFF) all
days.
START
PRG1
Press key 5 to con rm and continue
programming.
The text START PRG2 OFF will appear.
OFF
2ND TIME SLOT SWITCH ON
START
At this point, the second time slot must be
PRG1
programmed.
The sequence to be followed is the same
and is repeated as per the 1ST TIME SLOT
SWITCH ON.
08:00
ENGLISH
STOP
PRG1
12:00
MONDAY..
PRG1
ON OFF
START
PRG2
ON OFF
START
PRG2
15:00