Miele professional MF 02 Instrucciones De Montaje página 27

Produktgruppe 512
27 von 30
am
Parts required
Quantity Mat. no.
1 06197490
1 09885130
Note
This service and repair work should only be carried out by a suitably qualified electrician (with specialist training, knowledge and
experience, and recent related work experience) in accordance with all appropriate local and national safety regulations.
Commissioning, servicing, modification, testing and maintenance of electrical appliances should only be carried out in accordance with
all appropriate legal requirements, accident prevention regulations and valid standards. All regulations of the appropriate utility supply
companies and standards relating to safety (not limited to electrical safety) are to be complied with.
Danger!
Even with the machine switched off, voltage may be applied to some components.
Before starting any service work, the machine must be disconnected from the power supply. Suitable measurements must be made to
ensure that this is the case.
A general visual check and risk evaluation should always be carried out. Incorrect conversion or service work can be dangerous
(risk of fire, electric shock, etc.).
Danger!
Correct grounding function can be deactivated if casing parts are incorrectly assembled.
Correct grounding function must be ensured when reassembling the casing.
Carry out appropriate electrical safety checks.
Danger!
During installation, all accessible conductive parts that are not connected to ground must not have any link to ground (strengthened
double insulation).
To confirm this, insulation resistance and touch current measurements must be carried out.
Note
Installation kit mat. no. 06197490 for PW 6241, PW 6321 contains:
1 EZL 230(a) electronic, module 2 (liquid dispensing 7-12)
1 EV 230 adapter
1 electronics bracket
8 spacers (for securing the EZL 230(a) electronic)
1 coded plug MFM 2-5
1 wiring harness 48X-41X
1 wiring harness 49X-46X
1 wiring harness 51X-52X-101X
1 wiring harness 47X-100X
3 green yellow wires 0.75x240
1 accessory module
1 wiring diagram module 2, mat. no. 09021420
1 wiring diagram mat. no. 09882800
These instructions.
06.02.2014 Diese Unterlagen dürfen ohne unsere Genehmigung weder vervielfältigt noch Dritten zugänglich gemacht werden. Eigentumsrechte vorbehalten.
Umbau- und Montageanweisung
Designation
MF02 multifunction module PW6241-6321 installation kit
or
MF02 24-32 kg multifunction module USA installation kit
M.-Nr. 06572532