Miele professional MF 02 Instrucciones De Montaje página 5

Produktgruppe 512
5 von 30
en
Parts required
Quantity Mat. no.
1 06197490
1 09885130
Note
This service and repair work should only be carried out by a suitably qualified electrician (with specialist training, knowledge and
experience, and recent related work experience) in accordance with all appropriate local and national safety regulations.
Commissioning, servicing, modification, testing and maintenance of electrical appliances should only be carried out in accordance
with all appropriate legal requirements, accident prevention regulations and valid standards. All regulations of the appropriate utility
supply companies and standards relating to safety (not limited to electrical safety) are to be complied with.
Danger!
Even with the machine switched off, mains voltage may be applied to some components.
Before any service work is commenced, the machine must be disconnected from the mains. Suitable measurements must be made to
ensure that this is the case.
A general visual check and risk evaluation should always be carried out.
Incorrect conversion or service work can be dangerous (risk of fire, electric shock, etc.).
Danger!
Correct earthing function can be deactivated if casing parts are incorrectly assembled.
Correct earthing function must be ensured when refitting the casing.
Carry out appropriate electrical safety checks.
Danger!
During fitting, all accessible conductive parts that are not connected to the earth must not have any link to earth (strengthened double
insulation).
To confirm this, insulation resistance and touch current measurements must be carried out.
Note
The kit, Mat. no. 06197490 for PW 6241, PW 6321 contains the following:
1 electronic module EZL 230(a), module 2 (liquid dispensing 7-12)
1 adapter EV 230
1 electronic module holder
8 spacers (for electronic module EZL 230(a) fastening)
1 coding plug MFM 2-5
1 wiring harness 48X-41X
1 wiring harness 49X-46X
1 wiring harness 51X-52X-101X
1 wiring harness 47X-100X
3 connection wires, green-yellow 0.75 x 240
1 accessory module
1 wiring diagram module 2, Mat. no. 09021420
1 wiring diagram Mat. no. 09882800
Fitting instructions - Module 2, liquid dispensing 7 - 12, Mat. no. 06572532.
06.02.2014 Diese Unterlagen dürfen ohne unsere Genehmigung weder vervielfältigt noch Dritten zugänglich gemacht werden. Eigentumsrechte vorbehalten.
Umbau- und Montageanweisung
Designation
Fitting kit - MF02 multifunction module - PW 6241-6321
or
Fitting kit - MF02 24-32 kg multifunction module USA
M.-Nr. 06572532