Numark NuVJ Manual De Referencia página 5

5. [INSTA A/B]: These buttons allow you to quickly switch the video output to one of the
decks. For example, if you press [INSTA A] the video output will only show what is playing
on deck A, regardless of the crossfader position, until you release the [INSTA A] button. The
speed of the fade when the [INSTA A/B] buttons are pressed is determined by the Auto Fade
Speed knob on the front panel.
6. BANK: Use this knob to select different banks of video clips. Each bank contains up to 9
clips which can be toggled by pressing the corresponding pad. There are 16 different banks
which can be used on either of the two deck zones.
7. PMTR1: Each cell in a bank can be assigned an effect through the software. The PMTR1 knob
will then adjust the first effect parameter of the cell currently playing on that bank. This
parameter will be different, depending on which effect you have chosen for the particular cell.
8. PMTR2: The PMTR2 knob adjusts the second effect parameter of the cell currently playing on
that bank. This parameter will be different, depending on which effect you have chosen for
the particular cell.
9. [LATCH]: If the [LATCH] button is pressed on, the clips on the deck will play continuously
when triggered. If the [LATCH] button is pressed off, then the clips on the deck will play for
as long as the corresponding pad is held down.
10. [AUTO]: Press this button to play the clips (cells) of the current bank in a random
automated fashion.
11. [SYNC]: Press this button to synchronize the playback of the video clips playing on the deck
to the BPM of the session.
12. DISPLAY: The display helps you keep track of software parameters.
13. FX LEVEL: This knob adjusts the Master FX Mix. This setting describes how much of the
selected Master Effect will be mixed in with the original image. As you turn up the FX Level
knob, you will see more of the effected mix. As you turn down the FX Level knob, you will
see more of the original image.
14. [MASTER FX]: Press this button to activate and deactivate the Master Effect. You can swap
effects on the fly by selecting the desired effect with the Master FX knob.
15. MASTER FX: Rotate this knob to select the Master Effect. The Master effect will be applied
to the master mixing zone.
16. PMTR1: This knob adjusts the first parameter of the Master Effect. This parameter will be
different, depending on which effect you have chosen.
17. [INSTA BLACK]: Pressing this button will toggle the video output to black or to a selected
background visual assigned in the NuVJ software.
18. CONTRAST: Use this knob to adjust the contrast of the video output.
19. PMTR2: This knob adjusts the second parameter of the master effect. This parameter will
be different, depending on which effect you have chosen.
20. [BPM TAP]: You can use this button to manually adjust the tempo of the session by tapping
the button to the beat. If you hold the button for 3 seconds and then release it, the BPM of
the session will go back to the BPM detected from the sound input.
21. BRIGHT: Use this knob to adjust the brightness of the video output.
22. CROSSFADER: The crossfader allows you to mix the two visuals playing on each side. If you
move the crossfader to the right, you will see more of the right visual. Conversely, if you
move the crossfader to the left, you will see more of the left visual blended in.
5