Rear Panel; Front Panel - Numark NuVJ Manual De Referencia

Rear Panel

1. AC IN: If the unit is not being powered by the USB connection, it can be powered by
plugging an 6V-1A DC power adapter into this input.
2. USB: Connect a USB cable from your computer to this input. This port is used to power the
unit, as well as to transmit MIDI control to your computer and the software. Alternatively,
you may power the controller by plugging in a 6V-1A DC power adapter.
3. KENSINGTON LOCK: The unit can be attached and secured to a surface using this
Kensington Lock slot.

Front Panel

1. FADER MODE: This switch determines the operation of the Fader Start option, as specified in
the software.
2. AUTO FADE SPEED: This switch adjusts the speed of the auto fade. The auto fade speed
determines the speed of the fade from the current position to full A/full B when using the
Insta A/B buttons on the top panel.
3. FADER START: Fader Start allows you to start a selected pad by moving the fader toward
the deck that it is loaded on. For example, if the crossfader is in an extreme left or right
position, moving it toward the opposite side will trigger the video selected on that deck.
6