Craftsman 580.752160 Instrucciones De Uso página 12

3. ALWAYS point s pray g uninasafe direction and squeeze
spray g un trigger to retease retained high water pressure.
iMPORTANT: Spray g un traps high water p ressure, even
when engine i sstopped and water i s disconnected.
WARNING
The high pressure stream of water that this
equipment produces can cut through skin and its
underlying tissues, leading to serious injury and
)ossibte amputation.
Spray gun traps high water pressure, even when
engine is stopped and water is disconnected,
which can cause injury.
• Keephigh pressurehoseconnected to purnpand spraygun
whilesystemis pressurized.
o ALWAYS pointspraygun in safedirectionand squeeze spray
gun trigger,to release high pressure everytime you stop
engine.Engage trigger lockwhennot in use.
4. Engagetrigger lock on spray gun when not in use.
How te 8so Accessory Tray
The unit is equipped with an accessory tray with places to
store your spray gun and PrecisionSpray
TM
Seiector. There is
also a hook at the front of the accessory tray to hoid your
high pressure hose. identify alI accessories with the
iliustration on page 6.
NOTE:The extra hoie in the tray is for storing a utiiity brush.
The extra ciip in the tray is for storing a turbo nozzle.The
brush and turbo nozzie are NOT included with your pressure
washer. You can buy these items as optional accessories.
1= Mace PrecisionSpray
TM
Selector througll hole on
accessory tray, as shown.
.
3.
Mace spray gun through hote on accessory tray on rigllt
side of unit.
Hang high pressure hose on hook attached to accessory
tray on front of tray as shown.
How to Use PrecidonSpray
TM
Sdedor
Refer to the PrecisionSpray
TM
Selector instruction sheet for
proper use.
[ NOTICF
Product damagewiii occur if the gun trigger is squeezed
whiie the Selector is in-betweerH_ozziesettings.
NEVER turnthe Selector whilespraying.
Cteadng and Applying Hetergent
i A CAOT O
NEVER usecausticliquid with pressurewasher
UseONLYpressure washersafedetergents/soaps. Followall
rnanufacturers i nstructions.
Chemicalscan cause bodily injury, and/or property damage.
Te apply detergent feiiew these steps:
1. Attach one of the detergent siphon hoses foiiowing
instructions Attach Detefgent Siphon Hose to Pump.
iMPORTANT:Be sure engine is off and allowed to cool before
switching detergent siphoning hoses.
WARNING
Contact with muffler area can result in serious
burns.
Exhaustheat/gases can ignite combustibles,
structures or damage fuel tank causing a fire.
o DONOT touch hot partsand AVOID hot exhaustgases.
• Allowequipment t o cool beforetouching.
2. Prepare detergent soiution as required by job.
3. Make sure detergent shut=off valve on cleaning tank is in
"Off" position.
4= If using cleaning tank, pour detergent into cleaning tank.
NOTE:The cleaning tank holds one gaiion.
5. Rotate PrecisionSpray
TM
Selector to a iow pressure
position, as described in the PrecisionSpray
TM
Selector
instuction sheet.
NOTE:Detergentcannot be applied with the PrecisionSpray
TM
Seiector in a high pressure position.
6= Make sure garden hose is connected to water inlet.
Checkthat high pressure hose is connected to spray gun
and pump. Turn on water.
NSTICE
You must attach ali hoses before
Startingthe enginewithoutall the hosesconnected andwithout
thewaterturnedONwill damage the pump.
Damage to equipment r esultingfrom failureto followthis
instructionwill void warranty.
12