Installation And Commissioning; General Remarks; Starting To Use; Standard - Fronius TTG 1200A Manual De Instrucciones

Installation and commissioning

General remarks

The TIG welding torches are especially suitable for welding aluminium, CrNi and steel, and
stand out for their wide range of different versions.
The torches can be adapted to deal with a huge variety of different tasks, and do sterling
service in the field of manual series and one-off fabrication, as well as in the workshop sec-
tor.
The JobMaster TIG is a TIG welding torch with JobMaster function. During welding the
JobMaster-Function enables the parameters to be read off in an ergonomic manner and
important parameters can be adjusted directly on the JobMaster. Optimum control of the
welding process is ensured without handling being limited.

Starting to use

Before starting always check:
-
-
During welding, check the coolant circulation at regular intervals.
1
1
3
3

Standard

Cap-shaping - precondition:
-
Sealing ring at the welding torch connection
Coolant level
1
2
2
d
3
1
d
TIG-AC welding process
2
2
°
3 0
4
4
* JobMaster TIG Up/Down
37