Handlebar Switches - Yamaha YFZ450T Manual Del Propietário

1. Light switch "LIGHTS"
2. Engine stop switch "ENG. STOP"
3. Start switch "START"
1. Contacteur d'éclairage "LIGHTS"
2. Coupe-circuit du moteur "ENG. STOP"
3. Contacteur du démarreur "START"
1. Interruptor de luces "LIGHTS"
2. Interruptor de parada del motor "ENG. STOP"
3. Interruptor de arranque "START"

Handlebar switches

Light switch "LIGHTS"
Set the switch to the "LO" position to turn on the
low beam and the taillight.
Set the switch to the "HI" position to turn on the
high beam and the taillight.
Set the switch to the "OFF" position to turn off all
the lights.
NOTE:
_
The headlights and the taillight can be turned on
only when the engine is started.
_
Start switch "START"
The starter motor cranks the engine when this
switch is pushed.
CAUTION:
_
See the starting instructions on page 6-3 prior
to starting the engine.
_
4-7
EBU00530
EBU13741
EBU06470