Chapter 5: The Tape Player; Playing A Tape - Sony LBT-N350 Manual De Instrucciones

Chapter 5:
the Tape
Player

Playing a Tape

Recording From the
Turntable
Recording a CD
Recording a CD: Specifying
Tape Length (time edit)
Recording a CD: Specifying
Track Order (programme
edit)
Recording From the Radio
Recording From Another
Tape (dubbing)
Playing a Tape
SYSTEM
POWER –ON
DOLBY NR
5
2
TAPE REWIND
1
Press FUNCTION repeatedly until
"TAPE" appears in the display.
TAPE is selected.
2
Press EJECT to open the tape
compartment.
Insert a recorded tape in deck A or B
with the tape side facing down and the
side you want to play facing forward.
Push to close the compartment.
The tape will start playing from the
front side.
3
Press DECK SELECT to select the deck
you want to play.
The selected deck indicator lights up.
4
Press DIRECTION MODE to choose
single-side, dual-side, or relay play.
The DIRECTION MODE setting affects
both decks.
To play Set DIRECTION
MODE to
One side of the tape
Both sides.*
Both decks in RELAY
succession.**
* The deck stops automatically after
repeating the sequence 5 times.
** See "To play both decks in succession
(relay play)".
5
Press (to play the front side) or
(to play the reverse side).
The tape starts playing.
To
Stop play
Pause (deck B only)
Resume play after
pause
Fast forward
1
Rewind
4
3
TAPE
Remove the
2
cassette
* You can use TAPE REWIND even if
TAPE is not selected. To stop rewinding,
press this button again.
To play both decks in succession
(relay play)
Relay play always follows the following
sequence. When the reverse side of the tape
in deck B finishes playing, the following
sequence continues 4 more times.
Deck A
(Front side)
Deck B
(Reverse side)
1 Press EJECT and insert recorded
tapes in both decks.
2 Press DIRECTION MODE repeatedly
until "RELAY" appears in the display.
3 Press
or .
To stop relay play
Press .
When listening to a tape recorded with the
Dolby* B-type noise reduction system
Set the DOLBY NR selector to ON.
Dolby noise reduction system reduces tape
hiss noise in low-level high-frequency
signals.
* Dolby noise reduction manufactured
under license from Dolby Laboratories
Licensing Corporation. "DOLBY" and
double-D symbol are trademarks of
Dolby Laboratories Licensing
Corporation.
One Touch Play feature
Press TAPE (function) when the power is
off or when you are listening to another
sound source.
You can listen to the tape without pressing
any other buttons when a tape is in the
player. If no tape is inserted, the system
will just turn on.

Chapter 5: the Tape Player

Press
or or
for front side,
or TAPE
REWIND* for
reverse side
or TAPE
REWIND* for front
side,
for reverse side
EJECT
GB
Deck A
13
(Reverse side)
Deck B
(Front side)