Adjusting The Audio Emphasis; Making Your Personal Audio Emphasis File (Personal File) - Sony LBT-N350 Manual De Instrucciones

continued
To change the equalizer display
Each time you keep pressing DISPLAY for
a few seconds, the equalizer display
changes to show one of the four displays
below.
If the sound does not come in for about a
minute, the spectrum analyzer display
turns to a picture. The display is restored
when the sound comes in.
Spectrum analyzer 1
63 125 250 500 1k 2k
Spectrum analyzer 2
63 125 250 500 1k 2k
Spectrum analyzer 3
63 125 250 500 1k 2k
Graphic equalizer curve
GB
63 125 250 500 1k 2k
20
Adjusting the Audio
Emphasis
This feature lets you arrange the audio
emphasis by raising and lowering the level
of specific frequency ranges. Use the
buttons on the unit to do this operation.
SYSTEM
POWER –ON POWER –ON
1
1
Press the desired equalizer setting
button.
Chapter 6: Sound Adjustment
2
Press one of , ,
CONTROL).
The graphic equalizer curve and
fequency range appears in the display,
and the level value flashes.
3
Press
range you want to change.
4k 8k 16k
(Hz)
4k 8k 16k (Hz)
4
Press
of the frequency range.
4k 8k 16k (Hz)
4k 8k 16k
(Hz)
5
Repeat steps 3 and 4 to adjust other
frequency ranges.
To create the atmosphere of a movie
theater or concert hall
Press SURROUND so that the SUR
indicator lights up.
Making Your Personal
Audio Emphasis File
2,3,4
(personal file)
You can create a personal file of audio
patterns and store them in the memory of
the player. Later, call up an audio pattern to
play a favourite tape, CD, or radio
programme. Create up to five audio files.
SURROUND
1,5
or (CURSOR
DOLBY NR
DBFB
OFF
1 2 3 4 5
63 125 250 500 1k 2k 4k 8k 16k (Hz)
dB
flashing
or to select the frequency
DOLBY NR
DBFB
OFF
1 2 3 4 5
63 125 250 500 1k 2k 4k 8k 16k
(Hz)
dB
flashing
or to raise or lower the level
DOLBY NR DBFB
OFF
1 2 3 4 5
63 125 250 500 1k 2k 4k 8k 16k (Hz)
dB
flashing
SYSTEM
3
POWER –ON POWER –ON
1
Press the desired equalizer setting
button.
2
Press SURROUND to activate or
deactivate the surround effect to suit
your taste.
3
Adjust the sound using CURSOR
VOLUME
CONTROL. (See "Adjusting the Audio
1 DISC
Emphasis" for details.)
4
Press EQ MEMORY.
"MEMORY" appears and a file number
flashes in the display.
63 125 250 500 1k 2k 4k 8k 16k
(Hz)
VOLUME
1 DISC
5
Press a file number button that you
decide on.
"MEMORY" disappears.
The adjusted equalizer curve and the
surround effect settings are stored at the
file number you selected.
VOLUME
1 DISC
To call up the personal file
Press P.FILE so that the indicator of P.FILE
lights up and then, press the desired file
number button, or press P.FILE on the
remote repeatedly.
To hear the effect of the adjustment
Press the selected button repeatedly.
You can compare the difference between
the adjusted sound (the indicator is lit) and
the sound with no equalizer-effect (the
indicator is not lit).
4
2
P.FILE
DOLBY NR
DBFB
OFF
1 2 3 4 5
1 2 3 4 5
VOLUME
6 7 8 9 10
11 12 13 14 15
1 DISC
16 17 18 19 20
flashing