OPTIONAL UPPER PELLET LOADING KIT
The optional pellet loading allows pellets to be loaded into the tank without removing the insert from the installation
compartment (an operation which requires the machine to be switched off).
The kit can be used as an additional tank for the insert (9 kg ~ with 600 mm pipe configuration)
The kit can also be fitted later.
YOU MUST CAREFULLY FOLLOW THE FITTING INSTRUCTIONS PROVIDED!
ALWAYS CARRY OUT THE FITTING INSTRUCTIONS IN THE UTMOST SAFETY!
THE INSERT MUST BE COMPLETELY COLD, SWITCHED OFF
INSERT PREPARATION AND INSTALLATION, SEE ATTACHED FILE "INSERT PREPARATION AND
WARNING!
AND DISCONNECTED FROM THE MAINS.
ASSEMBLY" COD. 004276716
ENGLISH
ENGLISH
17