Dometic CRX 50 Instrucciones De Montaje página 24

Installing and connecting the refrigerator
To protect the battery, the refrigerator switches off automatically if the voltage is
insufficient (see table below).
Cut-off voltage
Cut-in voltage
➤ Determine the required cross section of the cable in relation to the cable length
according to fig. d, page 10.
Key to fig. d, page 10:
Coordinate axis
l
∅
A
NOTICE!
Make sure the polarity is correct.
➤ Before starting up the device for the first time, check whether the operating volt-
age and the battery voltage match (see type plate).
➤ Connect your refrigerator to a plug socket which is fuse-protected at 15 A
(at 12 V) or 7.5 A (at 24 V) (fig. e 1, page 10).
➤ Connect the red cable (fig. e rd, page 10) to the positive terminal of the battery.
➤ Connect the black cable (fig. e bk, page 10) to the negative terminal of the
battery.
24
12 V
10.4 V
11.7 V
Meaning
Cable length
Cable cross section
CRX
24 V
22.8 V
24.2 V
Unit
m
mm²
EN