Important Notice; System Overview - Jackson Airmax Manual De Instrucciones

Idiomas disponibles

Please read these instructions carefully before unpacking your JACKSON SAFETY

instructions in this leaflet may void your limited product warranty and adversely affect your health and safety.

The selection of this respiratory for the application should be the result of the risk assessment conducted by a professional health and

safety officer. Its use should be strictly in accordance to the instructions provided along with the product. If you have any questions

regarding the suitability of this product for your assigned task, please contact your designated health and safety officer or use our

dedicated technical help line for further support.

The use of this system is limited to the product variants indicated in this packaging. Any alteration made to adapt to other protective

devices may end up affecting the health and safety of the wearer.

CONTENT

This JACKSON SAFETY

•

Blower Unit with attached battery and filter

•

Waist belt

•

Welding helmet head top (welding helmet and hood/head gear) unit or grinding (visor and hood) unit

•

Hose and hose cover assembly

•

Battery charger

•

Lithium-ion battery

•

Instruction Manual

•

Flow-Test-Unit

SYSTEM OVERVIEW

JACKSON SAFETY

This power assisted particulate filtering device is belt mounted and provided with a high efficiency SL replaceable filter canister that

provides a filtration efficiency level above 99.5%. The respiratory system will provide a Nominal Protection Factor (NFP) of 500 when

used in conjunction with an original JACKSON SAFETY

TH3 P R SL.

The blower (including batteries) weights 880gr at a minimum flow rate of 170LPM for at least 8 hours at a comfortable noise intensity

of <70 dB. Lithium-ion batteries can be recharged multiple times and finally replaced at the end of their lifetime, they should be fully

charged at the beginning of the working shift.

The blower unit incorporates a number of safety measures to avoid the inadvertently change in the flow conditions that include:

•

The device has an audible alarm to indicate a blocked filter or low battery

•

The device alarm activates for about 1 second when the blower unit is switched on, and deactivates once the minimum operational

flow rate is achieved. Please consider the power-off state an abnormal situation while in use

•

The switch for the air supply is recessed and so not possible to switch the air supply off inadvertently

•

A Flow-Test-Unit is provided along with every AIRMAX

instructions and recommendations provided in this manual.

AIRMAX

powered respirator system should include:

AIRMAX

has been designed and manufactured to comply with EN 12941:1998+A1:2003+A2:2008 TH3 P R SL.