Publicidad
Idiomas disponibles
Idiomas disponibles
Nº
Symbol
1
2
3
4
hFE
5
ºC
6
7
8
•
Make sure the Sleep Mode is not on if you found there is no display on the LCD after turning
on the Meter.
•
Make sure the Low Battery Display
provided.
•
Pay attention to the
before carrying out measurement.
Warning!
To avoid harms to your or damages to the Meter from electric shock, please do not attempt to
measure voltages higher than 1000V or 750V rms although readings may be obtained.
Take extra attention when measuring high voltages to avoid electric shock.
To measure DC voltages, connect the Meter as follows:
1. Insert the red test lead into the
input terminal.
DISPLAY SYMBOLS (SEE FIGURE 2)
Warning: To avoid false readings, which could lead to possible electric
shock or personal injury, replace the battery as soon as the battery
MEASUREMENT OPERATION
is not on, otherwise false readings may be
symbol which is located besides the input terminals of the Meter
A. DC VOLTAGE MEASUREMENT (SEE FIGURE 3)
input terminal and the black test lead into the COM
Meaning
Data hold is active
Indicates negative reading
The battery is low.
indicator appears.
Unit of Transistor
Centigrade temperature
Test of diode
The continuity buzzer is on
Dangerous Voltages
21
Publicidad
