Digital Input - S&P CTB ECOWATT Instrucciones De Uso

PARAMETERS
< Kp=100 OK
OK OK
PARAMETERS
< Ki=20 OK
OK OK
SENSOR IN1
<SIN SENSOR OK
OK OK
SP-2 PRESSURE
< 50% OK
OK OK

DIGITAL INPUT

< (NC) OK
OK OK
OUTPUT PULSES
< 4 OK
OK OK
Press or to manually modify this parameter.
It is advised not to modify.
Press or to manually modify this parameter. It
is advised not to modify.
Press or to manually modify this parameter. It
is advised not to modify.
Press or to manually modify this parameter.
This value corresponds to the % of pressure set point
being the fan in night mode. To connect a time clock or
potential-free switch to the digital input J11
DIGITAL INPUT
< (NO) OK
Digital input:
- NC: Normally closed contact. The fan will pass to night mode when contact is opened.
- NO: Normally open contact. The fan will pass to night mode when contact is closed.
Press or to manually modify parameter that
displays the speed by J8 output (TACOM). It is advised
not to modify.
43