S&P CTB ECOWATT Instrucciones De Uso página 48

SENSOR IN1
< OFF OK
OK OK
IN1 RANGE
< 100%HR OK
OK OK
IN1 SET
< 50%HR OK
OK OK
IN1 (+/-)
< 25%HR OK
OK OK
Follow the same process if you select a different sensor type or activated the second input analog signal
.
IN2
MIN-OUTPUT
< 20% OK
OK OK
SENSOR IN1
< 0-10V%HR OK
SENSOR IN1
< 0-10VTempOK
SENSOR IN1
< 0-10VCO2 OK
Sensor IN1:
- NO SENSOR: No sensor connected to this input
- 0-10V/4-20mA %HR: Humidity sensor with output analog signal 0-10V/4-20mA
- 0-10V/4-20mA TEMP: Temperature sensor with output analog signal 0-10V/4-20mA
- 0-10V/4-20mA CO2: CO2 sensor with analog signal 0-10V/4-20mA
Press or to modify the scale of the external
sensor used
Press or to modify manually the middle range
of use.
Press or to modify manually the width value
of the adjustment range of the sensor
Press or to manually modify the minimum
output parameter to the motor
48
SENSOR IN1
< 4-20mA%HR OK
SENSOR IN1
< 4-20mATempOK
SENSOR IN1
< 4-20mACO2 OK
SENSOR