S&P CTB ECOWATT Instrucciones De Uso página 45

ENTER PASSWORD:
1 1 1 OK
OK OK
CHANGE PASSWORD
SI NO
OK OK
MOTOR TYPE
< EC OK
OK OK
SENSOR
< INTERNAL OK
OK OK
RANGE
< 400Pa OK
OK OK
SET POINT
< INTERNAL OK
OK OK
Enter the password
Default: 1 1 1
It is possible to assign a new password to your device
(channel)
No modify
SENSOR
<IN1 0-10V OK
SENSOR
<IN2 0-10V OK
Sensor: Sensor type
- INTERNAL: Pressure differential internal sensor
- IN1 0-10V: External sensor with analog signal 0-10V (J5 terminal)
- IN1 4-20mA: External sensor with analog signal 4-20mA (J5 terminal)
- IN2 0-10V: External sensor with analog signal 0-10V (J6 terminal)
- IN2 4-20mA: External sensor with analog signal 4-20mA (J6 terminal)
Press or to manually modify the parameter.
The value displayed corresponds to the scale of the
internal sensor factory pre-set. In an external sensor is
installed, introduce the corresponding range.
SET POINT
<CONSOLE OK
SET POINT
<IN1 4-20mA OK
SENSOR
<IN1 4-20mA OK
SENSOR
<IN2 4-20mA OK
SET POINT
<IN1 0-10V OK
SET POINT
<IN2 0-10V OK
45