D) How To Set Up A Made-To-Measure Program; E) Steps To Follow To Create A Personalised Program - Haverland RC 4 ECO Manual De Instrucciones

7º
If desired, you can display the operating schedules for each day of the
week for program P1 by pressing the OK and
The following example shows P1 programming for Wednesday, "day 3". For
the first twelve hours the heater is programmed in comfort from 08:00 until
12:00 and then the following twelve hours from 13:00 to 00:00, the appliance
will be in comfort for twelve hours (see "Fixed programming plans", page
44).
Successively pressing the
8º
Once you have selected the desired program, press OK. The heater will
return the Automatic mode after ten seconds.
The screen will display the following information:
a) Automatic operating mode.
b) Room temperature (22.6 ºC).
c) Presence sensor enabled and detecting.
d) Current time and day of the week.
e) Description of current program. In this
example, the heater is programmed from
00:00 to 08:00 in economic and from 09:00 to
12:00 in comfort.
f) An indication of whether the heater is opera-
ting. In this example it is heating.
In order to see more information possibilities, see the section "Automatic
operating mode" (page 43).

D) How to set up a made-to-measure program.

In addition to the factory set programs, you also have four programs available
that can be configured to your own personal needs.
U1/U4
Plans leave the factory with preset programming that you can modify.
MONDAY TO FRIDAY
PROGRAMS
COMFORT TIMES
U1
00:00 to 24:00 h
U2
-------------------
U3
08:00 to 20:00 h
Friday 13:00 to 24:00 h
U4
(Monday to 13 h Friday
During these time periods, the heater will operate at the comfort temperature.
During the rest of the time and those marked with " ----------" the heater will
operate at economic temperature.
keys successively:
keys will display all the days.
SATURDAY TO SUNDAY
COMFORT TIMES
00:00 to 24:00 h
--------------------
--------------------
00:00 to 24:00 h
Antifreeze)

E) Steps to follow to create a personalised program

First you have to define the time periods you wish to program into the heater,
for example, in your lounge:
* From Monday to Thursday, you are in from 18:00 until 24:00 h (Comfort
from 18:00 to 00:00 h).
* On Friday evenings you want comfort until 02:00 h (Comfort from 18:00 to
02:00 h).
* On Saturdays you want comfort from 13:00 until 02:00 h (Comfort from
13:00 to 02:00 h).
* And on Sundays you would like comfort from 13:00 until 24:00 h (Comfort
from 13:00 to 00:00 h).
1º
Press the "OK" key for at least two seconds in order to access the func-
tion menu.
2º
Use the
"Programming" symbol (Note 10).
3º
Press "OK" to accept the "Programming" operating mode.
4º
Once the "OK" key has been pressed, the current program will flash (in
this case P1):
You are now going to create a personalised program to cover your own
needs, for example "U1":
5º
Press the "+ / -" keys until U1 is displayed:
Programming the heater:
Press the "+" key and the day of the week selector will automatically indicate
TABLE 1
Monday "1" and the first twelve hours of Monday. As has already been stated,
the U1 program leaves the factory with the full 24 hours set to Comfort tempe-
rature.
Use the "+ / -" keys to select the comfort or economic temperature mode
for each hour of the day.
* To select Comfort
key.
* To select Economy
6º
Begin by programming the first twelve "am" hours for Monday "1".
(each square corresponds to a time period).
6.1) The time period from 00:00 to 01:00 will now be flashing. When it is flas-
hing, press "-" to set it to economic. The square will now flash at the height of
the half moon (Economy).
PAG. 45
keys to position the function selector cursor
Note: The U1 program is factory set
with all the time periods program
med with the comfort temperature
(see Table 1, Page 45).
during a specific time period, press the "+"
during a specific time period, press the "-".
over the
Note 10
0 1