Set-Up & How To Brew - Mr Coffee Keurig BVMC-KG1 Manual Del Usuario

SET-UP & hOw TO bREw
1. Place Brewer upright on a flat surface, remove
protective sheet and plug into outlet.
2. DO NOT remove or puncture the foil lid of
the K-Cup portion pack.
®
3. Lift front facing of the brewer to insert
a K-Cup.
4. Place chosen K–Cup into the K-Cup
Assembly Housing.
CAUTION: There are two sharp needles
that puncture the K-Cup, one above
the K-Cup Holder and the other in the
bottom of the K-Cup Holder. To avoid risk
of injury, do not put your fingers in the
K-Cup Housing Assembly.
6
5. Lower the front facing completely and
firmly to close the Lid and puncture the
K-Cup portion pack.
6. Depress the water marking button and the
hot water tank will open automatically.
7. Fill the Hot Water tank with filtered
or bottled water up to the FILL LEVEL
indicator.
NOTE: Any spills outside the fill area will
flow to the drip tray.
8. Close the Hot Water Tank cover.
7