Installing And Removing The Card - Canon EOS REBEL T7i Manual De Instrucciones Básicas

Installing and Removing the Card

You can use an SD, SDHC, or SDXC memory card (sold separately)
with the camera. SDHC and SDXC memory cards with UHS-I can also
be used. The captured images are recorded onto the card.
Make sure the card's write-protect switch is set upward to enable
writing and erasing.
Installing the Card
Write-protect switch
Possible shots
Open the cover.
1
Slide the cover as shown by the

arrows to open it.
Insert the card.
2
As shown by the illustration, face

the card's label side toward you
and insert it until it clicks in place.
Close the cover.
3
Close the cover and slide it in the

direction shown by the arrows until it
snaps shut.
When you set the power switch to

<1>, the number of possible shots
will be displayed on the LCD monitor.
33