Removing And Mounting The Seat - Ottobock MPS Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CAUTION
Failure to check for proper functioning
Falling, tipping over of the user due to lack of maintenance
X In the interest of the user's safety, check the product for correct function before each use�
X Please also read the instructions in the section "Maintenance" > "Maintenance intervals"�
CAUTION
Unsecured screw connections
Pinching, crushing, tipping over, falling of user due to assembly errors
X After all adjusting/readjusting work, retighten the mounting screws/nuts firmly� Observe any torque settings
which may be specified�
X Any time you loosen a screw connection with thread lock, replace it with a new screw connection or secure
the old screw connection with medium strength thread locker (e�g� Loctite® 241)�
CAUTION
Improper use of self-locking nuts
Tipping, falling over of the user due to screw connections coming loose
X Always replace self-locking nuts with new self-locking nuts after disassembly�
INFORMATION
Please also observe the safety instructions in the section "Safety" > "Safety instructions for use"�
In the interest of user safety, the following inspection must be conducted prior to use:
1�
Verify firm locking of the seat and back angle adjustment mechanism�
2�
Verify the functionality of all belt buckles on the safety belts and/or positioning aids�
6.2   
Removing and mounting the seat
CAUTION
Incorrect mounting of the seat
Falling out of the user if the seat is not secured
X Secure the seat using the seat lock�
X When attaching the seat, make sure that it engages into the mobility base�
To facilitate transportation of the rehab buggy in a passenger vehicle or to divide the weight into two units for lifting,
the seat can be easily detached from and reattached to the outdoor mobility base�
Detaching the seat
1�
Stand next to the seat and hold the seat by the top of the backrest with one hand�
2�
Push the seat lock lever forward (see Fig� 7)�
Æ The retaining claw will now release the seat adapter�
3�
Tip the seat back at an angle of approx� 45° and then lift it up (see Fig� 7)�
MPS
6
Settings and use
7
Ottobock | 11

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido