Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Settings and use
Mounting the buildup
1�
Drill holes at the proper positions in the footplate�
2�
Attach the buildup to the footplate with the screws�
Using the buildup
1�
Open the Velcro fastener�
2�
Place the foot on the shoe holder�
3�
Pull the straps firmly around the shoe crosswise and close the Velcro fastener fully�
6.12.4   
Pads
INFORMATION
X Prior to mounting the pads, adjust the seat�
6.12.4.1   
Footplate buildup padding
The footplate buildup can be equipped with padding�
Attaching the padding
1�
Attach the self-adhesive Velcro strip to the bottom of the buildup�
2�
Place the padding on the buildup and fasten the projecting ends to the Velcro strips�
6.12.4.2   
Armrest pads
The armrests can be equipped with a pad�
Attaching the pad
1�
With the open side, slide the pad over the armrest from the outside to the inside (see Fig� 54)�
6.12.4.3   
Elbow pads
The positioning tray can be equipped with elbow pads�
Attaching the pad
1�
Drill two holes respectively in the desired corners of the positioning tray (see Fig� 55)�
2�
Screw the pads to the tray (see Fig� 56)�
24 | Ottobock
54
55
56
MPS

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido