KAHLES HELIA KX Manual De Instrucciones página 6

l To ensure perfect alignment of the scope to the rifle, please
entrust mounting of the scope to a competent gunsmith. The rifle
scope shall be mounted centrical. The screws of mounts shall in
no case be tightened stronger than max. 240 N/cm. The reticle has
been factory-set to the mechanical middle position.
l KAHLES rifle scopes are adjusted to be parallax free at a standard
distance of 100m (other distances on request).
l
KAHLES HELIA C/CBX, K312 II, K624i: Reticles in the first image
plane increase in size with the increase in magnification. KAHLES
HELIA KX/KXi/CSX, K418TT, K624TT, K1050: Reticles in the second
image plane remains unchanged.
l
KAHLES scopes are water- and gas-tight to a pressure of 0,3 bar
corresponding to a depth in water of 3 m.
Focusing
l Turning the eyepiece can correct
defective vision. You get a perfectly sharp
and clear image without glasses. It is not
necessary to wear glasses within the total
range of dioptric adjustment from +2 to
-3,5 diopters (except astigmatism).
Zeroing In
l The point of impact can be corrected by the precise click
adjustment of elevation and windage.
l Elevation and windage are protected by screw caps. Unscrew caps
for zeroing in. (exception: K312 II, K624i, K1050, K4i)
l KAHLES HELIA KX/KXi/C/CBX/CSX, K418TT, K624TT, K1050, K4i,
K312 II (ccw), K624i: Counterclockwise adjustment moves the point
of impact upwards and to the right respectively. One click equals –
index disk.
l KAHLES K312 II (cw), K624i (cw): Clockwise adjustment moves the
point of impact upwards and to the right respectively. One click
equals – index disk.
6