Safety Instructions - Michelin MPX 200 THO Instrucciones De Uso

12
English
1

SAFETY INSTRUCTIONS

1.1
The appliance you have purchased is a technologically advanced
product designed by one of the leading European manufacturers
of high pressure pumps. To obtain the best performance from
your unit, read this booklet carefully and follow the instructions
each time you use it. During connection, use and servicing of
the appliance, take all possible precautions to protect your own
safety and that of the people in the immediate vicinity. Read the
safety regulations carefully and comply with them on all occasions;
failure to do so may put health and safety at risk or cause expensive
damage.
SAFETY RULES/RESIDUAL RISKS
2
2.1 SAFETY "DO NOT'S"
2.1.1
inflammable or toxic liquids, or any products which are not
compatible with the correct operation of the appliance.
2.1.2 i
njury hazard
people or animals.
2.1.3 e
lectric shock hazard
towards the unit itself, electrical parts or towards
other electrical equipment.
2.1.4 i . DO NOT allow children or incompetent
njury hazard
persons to use the appliance.
2.1.5 e
xplosion hazard
high pressure hose is damaged.
2.1.6 a
ccident hazard
position.
2.1.7 a
ccident hazard
the appliance, if not, inform your dealer. Units without
plates must NOT be used as they are unidentifiable and potentially
dangerous.
2.1.8 e
xplosion hazard
the setting of the safety valve or the safety devices.
2.1.9 h
azardous alteration of operating performance
alter the original diameter of the spray head nozzle.
2.1.10
a
ccident hazard
2.1.11
Make sure that cars do not drive over the high pressure hose.
2.1.12
e
xplosion hazard
pulling on the high pressure hose.
2.1.13
e
xplosion hazard
tyre valves or other pressurised components, the high pressure jet
is potentially dangerous. Do not use the rotating nozzle kit, and
always keep the jet at a distance of at least 30 cm during cleaning.
2.1.14 s
uffocation hazard
indoors without sufficient ventilation.
e
xplosion or poisoning hazard
DO NOT use the appliance with
. DO NOT direct the water jet towards
. DO NOT direct the water jet
. DO NOT use the appliance if the
. DO NOT jam the trigger in the operating
. Check that the data plates are affixed to
. DO NOT tamper with or adjust
. DO NOT
. DO NOT leave the appliance unattended.
. DO NOT move the appliance by
. When directed towards tyres,
. DO NOT use the appliance
2.2 SAFETY "MUSTS"
2.2.1 s
hort circuit hazard
PROTECTED against the water jet.
2.2.2
i . High pressure may cause parts to rebound: wear
njury hazard
all the protective clothing and equipment needed to ensure the
operator's safety.
2.2.3
i
njury hazard
firmly to counteract the recoil.
2.2.4 c
requirements of the local water supply company.
According to DIN 1988, the appliance may only be connected to
the mains drinking water supply if a backflow preventer valve with
drain facility is installed in the supply hose.
.
2.2.5 i
njury hazard
disconnecting the unit hose.
2.2.6 a
ccident hazard
time that the screws are fully tightened and that there are
no broken or worn parts.
2.2.7
which will not corrode the coating materials of the high pressure
hose/electrical cable.
2.2.8 i
njury hazard
keep a minimum distance of 16 yd. (15m) away.
. All electrical conductors MUST BE
. Before pressing the trigger, GRIP the gun
. COMPLY WITH the
ontamination hazard
. DISCHARGE residual pressure before
. Before using the appliance, CHECK every
e
xplosion and electric shock
. ONLY USE detergents
hazard
. ENSURE that all people or animals