Initial Use; Switching Off - Ortovox 3+ Instrucciones De Uso

3+

INITIAL USE

SWITCHING ON
Turn the ON/OFF switch (1) counter-
clockwise. The rotary switch clicks into
the position "I" and is now secured against
being unintention-ally switched off.

SWITCHING OFF

Undo the unlocking slide (10) and
turn the ON/OFF switch (1) clockwise
to the position "O".
SELF-TEST, TRANSMISSION MODE
After switching on the 3+, the 10-digit
serial number appears.
The automatic self-test begins with the
display check.
The transmitter, receiver, smart antenna,
and sensors are then tested.
The remaining battery capacity is also
displayed as a percentage (e.g. "99").
For further information about the battery, see p. 42
The installed software version then follows
(e.g. "2.0").
32 EN
INSTRUCTIONS
10
(device in transmission mode)
1
1