SOLAC AS3242 Instrucciones De Uso página 19

3 Shake the HEPA protector filter over a rubbish bin, and bang it gently against the sides
of the bin until no more dust falls off.
4 Rinse the HEPA protector filter in warm water, and allow it to dry completely.
CLEANING THE APPLIANCE
p
Before cleaning the appliance, unplug it from the mains. Check that no water
gets into the appliance.
,
Clean the appliance before using it for the first time, immediately after each use and
after not using it for a long period of time. You will thus ensure the correct operation of
the appliance and prolong its useful life.
1 Clean the outside of the appliance with a damp cloth. Do not use any abrasive products
or solvents.
CAUTION! When you want to dispose of the appliance, NEVER throw it in the
rubbish bin. Take it to the CLEAN POINT or waste collection centre closest to your
home for processing. You will thus be helping to take care of the environment.
ECOLOGICAL DESIGN
INFORMATION ON COMPLIANCE WITH ECOLOGICAL DESIGN REQUIREMENTS
• This vacuum belongs to the "general purpose vacuum cleaner" group: It has a brush
designed for cleaning both carpets and wooden floors.
• This vacuum cleaner meets the ecological design requirements as set out in Annex I
of the EU regulation (666/2013) through which directive 2009/125/EC applies.
• European standard EN 60312-1 is referenced in order to determine compliance with
the ecological design requirements and to calculate the energy labelling parameters.
• The indicative annual energy consumption (kWh per year) calculated on the basis of
50 cleaning sessions. Actual annual energy consumption will depend on how the
appliance is used.
ECOLOGICAL DESIGN
en
17