Menu List - Sony UP-897MD Manual De Instrucciones

Menu List

This section describes the menus displayed as you turn
the jog dial. The setting surrounded by
indicates the factory setting.
Item Function
AGC To adjust the
input signal to the
optimum printing
level
a)
ASPCT To select the
aspect ratio
BEEP To select whether
the operation and
error tones sound
CLEAN To start head
cleaning
COLOR To select the
input signal to be
printed
b)
DIR To select whether
the top or bottom
of the screen is to
be printed first
46
Adjustments and Settings Using the Menu
Settings
AG:ON: Adjusts the input
signal to the optimum level,
when the printout image
appears too dark or too
light.
[AG:OFF]: Normally select
this setting.
BACK: Cancels the setting
change and returns to the
item selection column.
AS:1:1: Prints a video
signal with an aspect ratio
of 1:1.
[AS: 4:3]: Normally select
this setting.
BACK: Cancels the setting
change and returns to the
item selection column
BE: OFF: The operation
tone does not sound.
[BE: ON]: The operation
and error tones sound.
BACK: Cancels the setting
change and returns to the
item selection column.
[CL: OK]: Starts the head
cleaning. Be sure to use the
supplied cleaning sheet.
BACK: Cancels the head
cleaning and returns to the
item selection column.
CO:ON: Prints the color
signal.
[CO:OFF]: Prints the black
and white signal.
BACK: Cancels the setting
change and returns to the
item selection column.
DI: REV: Starts to print in
the reverse direction (from
the top of the screen).
[DI: NOR]: Starts to print in
the normal direction (from
the bottom of the screen).
BACK: Cancels the setting
change and returns to the
item selection column.
Item Function
FEED To select the
paper feed
method to be used
after printing
GAMMA To select the tone
(When the of the printouts
"ME:S" is (density
selected in gradation)
"MEDIA" is
selected,
GAMMA is
fixed to
TONE 1.)
IMAGE To set the printout
to either positive
printout or
negative printout
INFO To select whether
or not the print
conditions (such
as contrast,
brightness,
gammas and
sharpness
information) are
printed under the
image
INTRT To change the
operation of
printing
interruption
Settings
FE: OFF: Feeds less paper
between prints to conserve
paper, or when printing
multiple pictures on the
same sheet. More pictures
can be printed on one sheet,
but because there is so little
space between printed
pictures, you must press the
FEED button before cutting
the paper.
[FE: ON]: Feeds extra blank
paper between prints.
BACK: Cancels the setting
change and returns to the
item selection column.
GA:4: TONE 4 Softest
gradation
GA:3: TONE 3 Hard
gradation
[GA:2]: TONE 2 Standard
GA:1: TONE 1 Soft
gradation
BACK: Cancels the setting
change and returns to the
item selection column.
IM:NEG: Makes negative
printouts.
[IM:POS]: Makes normal
printouts.
BACK: Cancels the setting
change and returns to the
item selection column.
IF:ON: Prints the
information.
[IF:OFF]: Does not print the
information.
BACK: Cancels the setting
change and returns to the
item selection column.
IN:ON: Stops printing by
pressing the PRINT button
during printing and prints a
new image captured at
instant you pressed the
PRINT button.
[IN:OFF]: Does not stop
printing even if the PRINT
button is pressed. After
completing the current
printing, the unit prints the
image captured at instant
you pressed the PRINT
button.
BACK: Cancels the setting
change and returns to the
item selection column.