If the Paper Jams
If the paper jams after you press the PRINT button,
remove the jammed paper following the steps below.
1
Remove the paper tray.
If any printouts have been ejected onto the paper
tray and have accumulated on the paper tray,
remove them before removing the paper tray.
2
Check whether any paper is jammed inside the
printer. If you find a jammed sheet, slowly pull it
straight out.
3
Load the paper into the paper tray correctly.
Set the paper securely
under the tabs.
68
Troubleshooting
Notes
• Do not reuse the jammed paper. Discard that
paper.
• Use only paper recommended in this manual.
4
Re-insert the removed paper tray.
If you can not remove the jammed paper yet
Precautions
• Turn the printer power off and remove the power cable
from the printer. However, any images stored in
memory will be lost when you turn the printer off.
After finishing the following operations and turning
the printer on again, recapture the image into memory.
• When you turn the printer over, remove any
connecting cables. If cables are broken or bent, this
may cause fire or electrical shock.
• When you remove the jammed paper, be careful not to
injure your fingers when touching the parts inside the
printer.
1
Be sure to set the power switch of the printer to off
and remove the power cable and other connecting
cables.
2
Remove the paper tray from the printer.
3
Turn the printer over.
4
Remove the two screws with which the back cover
plate is secured, using a coin.