Illumination Color Preset Memory; Illumination Color Preset Recall; Auxiliary Input Display Setting - Kenwood DPX503 Manual De Instrucciones

Function of DPX503

Illumination Color Preset Memory

Saving the combination of the Illumination Colors
selected for each place. The memory cannot be
erased by the Reset button.
1
Set the Illumination Color for each place
Refer to <Illumination Color Selection> (page 10).
2
Enter Illumination Color Preset Memory mode
>
Select "COLOR" "PRESET"
For how to select Function Control item, refer to
<Function Control> (page 6).
3
Put the Illumination Color Preset in the
memory
Press the Control knob.
"Memory?" is displayed.
4
Turn the Control knob to select "YES", and then
press the Control knob.
"Memory Completed" is displayed.
5
Exit Illumination Color Preset mode
Press the [FNC] button.
⁄
• Register 1 pair of Illumination Color Preset Memory.
• If you press the Reset button, the value in the memory
will be default setting value of "Illumination Color
Selection. "
Function of DPX503

Illumination Color Preset Recall

Recalling the selection you saved in Illumination
Color Preset mode.
1
Enter Audio Preset Recall mode
>
Select "COLOR" "PRESET"
For how to select Function Control item, refer to
<Function Control> (page 6).
2
Recall the Illumination Color Preset
Press the Control knob.
"Recall?" is displayed.
3
Turn the Control knob to select "YES", and then
press the Control knob.
"Recall Completed" is displayed.
4
Exit Illumination Color Preset Recall mode
Press the [FNC] button.
>
"MEMO".
>
"RECALL".
⁄
• When you recall Illumination Color Preset, the current
Illumination Color settings will be replaced with the
preset selection.

Auxiliary Input Display Setting

Selects the display below when changing to
Auxiliary input source.
1
Select Auxiliary input display setting item
during Menu mode (In AUX mode)
Select the "Name Set" display.
For how to select Function Control items, refer to
<Function Control> (page 6).
2
Enter Auxiliary input display setting mode
Press the Control knob for at least 1 second.
The presently selected Auxiliary input display is
displayed.
3
Select the Auxiliary input display
Turn the Control knob or push it towards up or
down.
"AUX"/ "DVD"/ "PORTABLE"/ "GAME"/ "VIDEO"/ "TV"
4
Exit Auxiliary input display setting mode
Press the [FNC] button.
⁄
• When operation stops for 10 seconds, the name at that
time is registered, and the Auxiliary input display setting
mode closes.
• The Auxiliary input display can be set only when the
built-in auxiliary input or the auxiliary input of optional
KCA-S220A is used. On the KCA-S220A, "AUX EXT" is
displayed by default.
11
|
English