Important:
After this, the base station will scan the outdoor sensors (channel 1 to
channel 3) in the TEMPERATURE window. There is no need to press any
button during this process. After this, the base station will start to scan
the DCF77 time transmitter in the CLOCK window. The default time the
base station starts with is 12:00, which will be automatically reset during
this process. There is no need to press any button during this process,
either.
Recommendation:
Allow the base station to receive the outdoor sensor's data and the time
without touching any button for about 6-8 minutes during the base sta-
tion's initial set up. This will give the base station time to synchronize with
the sensors, stabilize pressure readings and attain default settings.
4.1 WEATHER FORECAST
This unit is capable of detecting atmospheric pressure changes. Based
on collected weather data, it forecasts the weather for the next 12 to 24
hours.
When the
display
shows...
The
forecast
Sunny
is...
Note:
The weather forecast accuracy is approximately 70%. The weather sta-
tion shows the forecasted (predicted) conditions, not the current condi-
tions. The 'Sunny' icon indicates clear weather, even when displayed at
night.
36
Partly
Cloudy
Cloudy
Heavy
Rainy
Rain
Heavy
Snowy
Snow