Manual Flash Mode With Distance Guideline (Gn) - Metz 52 AF-1 Nikon digital Manual De Instrucciones

The faster the shutter speed, the lower the
guide number!
The setting for automatic high-speed syn-
chronisation occurs on the camera (see
camera operating instructions)!
The display of the flash unit then in addition
shows "FP" (
7.5 Manual flash mode with distance
In this flash mode you enter the distance to
the subject in the flash unit. The mecablitz
52AF-1 coordinates the flash output and the
f-stops provided by the camera.
If sufficient exposure is not achieved for the
distance set, the sign
the distance information.
k
156
TTL
) .
FP
guideline (GN)
appears in front of
Setting the mode of operation
• Switch on the flash unit with the
button. The start screen appears.
Thereafter, the flash unit always switches
M
on with the mode of operation that was
7,9 m
used last.
m
Z
35 F4.0
OOM
• Tap the shutter release to transfer data
m
between the flash unit and the camera.
INFO 1/1
M
GN
• Press the sensor buttons
MASTER
touch display and select
• Press the
display.
GN
1,0 m
m
Z
F4.0
35
OOM
m
INFO EV
GN
• Press the sensor button on the touch
1,0 m
display for the distance.
m
Z
F4.0
35
OOM
• Press the sensor buttons
m
EV touch display and select the distance to the
INFO
subject.
2,5 m
3,0 m
• Press the sensor buttons for the distance
3,5 m
selected.
The setting will take effect immediately.
on the
GN
.
GN
sensor button on the touch
on the