10.1.4 Remote channel settings
There are four independent remote channels
to use so that multiple remote systems in the
same room do not interfere with one another.
Master and Slave flash units belonging to the
same remote system must be set to the same
remote channel.
• Press the
for the selection menu to appear.
• Press the
touch display.
• Press the
ZOOM
touch display and select "CHANNEL".
CHANNEL
• Press the
touch display.
• Press the
1
touch display and select a remote channel,
2 CH
2
CH
e.g
• Press the sensor buttons on the touch
3
display e.g.
The setting will take effect immediately.
The channel setting can be checked by
pressing the sensor button
D
button as often as it takes
PARA
sensor button on the
sensor buttons on the
CHANNEL
sensor button on the
sensor buttons on the
.
2 CH
for the channel selected.
INFO
.
10.2 Remote slave flash mode
The flash unit supports the wireless Nikon
remote system in slave flash mode and is
compatible with the Nikon system „Advanced
Wireless Lighting".
At the same time, one or more slave flash
units can be remotely controlled from one
master flash unit on the camera
(e.g. mecablitz 52 AF-1 N digital).
A slave flash unit can be assigned to one of
three possible slave groups (GROUP A, B or
C). The master flash unit can control all of
these slave groups simultaneously and at the
same time take the settings for each slave
group into account.
So that multiple remote systems in the
same room do not interfere with one another,
there are four independent remote channels
available (CH 1, 2, 3 or 4).
Master and slave flash units belonging to the
same remote system must be set to the same
remote channel.
The slave flash units must be able to receive
the light from the master flash unit with the
integrated sensors for the remote mode .
Depending on the camera model, the
camera's internal flash unit can also function
as master flash unit.
k
165