Servo Mode; Setting Servo Flash Mode; Pre-Flash Suppression Or Synchronisation Settings - Metz 52 AF-1 Nikon digital Manual De Instrucciones

Ocultar thumbs Ver también para 52 AF-1 Nikon digital:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 233

10.4 SERVO mode

SERVO mode is a simple slave mode without
or with complete pre-flash suppression in
which the slave flash unit always triggers a
flash as soon as the camera flash unit recei-
ves a light pulse.
In SERVO mode, only manual flash mode is
possible. Manual flash mode is automatically
activated after switching to SERVO mode.

10.4.1 Setting SERVO flash mode

• Set the camera to TTL mode.
BL
TTL
• Press the sensor button of the displayed
-7,9 m
0,7
m
Z
F4.0
35
OOM
m
EV
INFO
• Press the
SLAVE
k
SERVO
• Press the
If desired, partial light output can be set,
SYNC
see 10.4.3.
M-SERVO
Z
24 mm
OOM
INFO
P
168
mode of operation on the touch display as
many times as it takes for the display for
selecting the mode of operation to appear.
sensor buttons on the
touch display and select „SERVO" .
SERVO
sensor button on the
touch display.
The mode of operation is adopted.
10.4.2 Pre-flash suppression or
synchronisation settings
• Set the camera to TTL mode.
• Press the sensor button
SYNC
M-SERVO
display as many times as it takes for the
display for selecting the type of synchroni-
Z
24 mm
OOM
sation.
INFO
P
• Press the sensor button on the touch
display:
SYNC
synchronisation without pre-flash
synchronisation with pre-flash
The mode of operation is adopted.
Learn
If the synchronisation set here does not work
properly, then proceed as described in
10.4.4.
SYNC
on the touch

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido