Multilaser RE027 Manual Del Usuario página 123

www.multilaser.com.br
The Router provides Auto-Detect function and supports three popular ways PPPoE, Dynamic IP and Static IP to connect to the
Internet. It's recommended that you make use of the Auto-Detect function. If you are sure of what kind of connection type your ISP
provides, you can select the very type and click Next to go on configuring.
4. If you select Auto-Detect, the Router will automatically detect the connection type your ISP provides. Make sure the cable
is securely plugged into the WAN port before detection. The appropriate configuration page will be displayed when an active Internet
service is successfully detected by the Router.
1) If the connection type detected is PPPoE, the next screen will appear as shown in Figure 3 7.
- User Name / Password – Enter the User Name and Password provided by your ISP. These fields are
case sensitive. If you have difficulty with this process, please contact your ISP.
2) If the connection type detected is Dynamic IP, the next screen will appear as shown in Figure 3-9. Then you can go
on with the wireless configuration.
3) If the connection type detected is Static IP, the next screen will appear as shown in Figure 3-8.
Figure 3-7 Quick Setup - PPPoE
Figure 3-8 Quick Setup - Static IP
121