Binding Settings - Multilaser RE027 Manual Del Usuario

www.multilaser.com.br
There are two submenus under the IP &MAC Binding menu (shown in Figure 4 63): Binding Setting and ARP List. Click any of them, and
you will be able to scan or configure the corresponding function. The detailed explanations for each submenu are provided below.
4.14.1 Binding Settings
This page displays the IP & MAC Binding Setting table; you can operate it in accord with your desire as shown in Figure 4-64.
• M AC Address - The MAC address of the controlled computer in the LAN.
I P Address - The assigned IP address of the controlled computer in the LAN.
•
• B ind - Check this option to enable ARP binding for a specific device.
• M odify - To modify or delete an existing entry.
When you want to add or modify an IP & MAC Binding entry, you can click the Add New... button or Modify button, and then you will go to the
next page. This page is used for adding or modifying an IP & MAC Binding entry, shown in Figure 4-65.
To add IP & MAC Binding entries, follow the steps below.
Figure 4-64 Binding Settings
Figure 4-65 IP & MAC Binding Settings
183