Firmware Upgrade - Multilaser RE027 Manual Del Usuario

You can use ping/traceroute to test both numeric IP address or domain name. If pinging/tracerouting the IP address is successful,
but pinging/tracerouting the domain name is not, you might have a name resolution problem. In this case, ensure that the domain name you
are specifying can be resolved by using Domain Name System (DNS) queries.
• IP Address/Domain Name - Type the destination IP address (such as 202.108.22.5) or Domain name (such as http://www.
multilaser.com.br).
• Pings Count - The number of Ping packets for a Ping connection.
• Ping Packet Size - The size of Ping packet.
• Ping Timeout - Set the waiting time for the reply of each Ping packet. If there is no reply in the specified time, the connection
is overtime.
• Traceroute Max TM - The max number of hops for a Traceroute connection.
Click Start to check the connectivity of the Internet.
The Diagnostic Results page displays the result of diagnosis.
If the result is similar to the following screen, the connectivity of the Internet is fine.
190
Note:
Only one user can use this tool at one time. Options "Number of Pings", "Ping Size" and "Ping Timeout" are used for Ping function.
Option "Tracert Hops" are used for Tracert function.
4.16.3. Firmware Upgrade
Choose menu "System Tools > Firmware Upgrade", you can update the latest version of firmware for the Router on the following screen.
Figure 4-73 Diagnostic Results
www.multilaser.com.br